Archived posting to the Leica Users Group, 2004/11/04

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] OT OT...EPSON 2200 problem?
From: tedgrant at shaw.ca (Ted Grant)
Date: Thu Nov 4 14:09:52 2004
References: <r02010400-1035-60B9BD392DAE11D98C24000A957A8242@[67.86.119.182]> <p06100530bdaec2ed32cb@[10.0.1.2]> <01d801c4c1dc$9c7389c0$4649c33e@sypcom> <6.1.2.0.2.20041103144814.04fd9670@mail.comporium.net> <01e301c4c1de$ddda2ca0$4649c33e@sypcom> <6.1.2.0.2.20041103150935.0504fb28@mail.comporium.net> <002101c4c295$fdd64450$87d86c18@ted> <354272BC-2E91-11D9-B81C-0003938051BC@snet.net>

WOW Roy I better have Sandy here with all those buttons to press. :-) She 
can do the things and I'll read her the instructions, then if she screws-up 
I can blame her! ;-)

You realize she's not here as I type this and by the time she get's around 
to seeing any of this it'll be too late! ;-)
thanks,
ted

----- Original Message ----- 
From: "Roy Zartarian" <rzartarian@snet.net>
To: "Leica Users Group" <lug@leica-users.org>
Sent: Thursday, November 04, 2004 10:41 AM
Subject: Re: [Leica] OT OT...EPSON 2200 problem?


Ted:

This sounds like the printer is telling you that the waste ink pad (a
little sponge that sits under the print head when it is in the parked
position) is full.

One quick and dirty way I've found to do a reset is:

1. Turn off the printer power and unplug the power cord from the wall.
Disconnect the computer interface cable at the back of the printer.

2.After one minute reattach the power plug to the wall, but don't
reattach the computer cable.

3.Hold down the ROLL and the PAPER ADVANCE buttons simultaneously.

4.Turn the printer on. after 2 blinks, all the ink lights come on,
then release the buttons being held down.

5.Press and hold the ROLL button for 10 seconds.

6.Release the ROLL button and the printer will initialize, which resets
the Waste Ink Pad Counter.

7.Once initialization is complete, turn the printer power off.

8.Reconnect the interface cable.

9.Turn the printer on and print a document.

The procedure is supposed to reset an internal counter in the printer.

If the procedure stops the blinking, you (or most likely Sandy) will
have to clean the waste ink pad.

Turn the printer on. Push the "Change Ink" button. When the print head
is in the changing position, pull the plug to cut the power. Then push
the print head to the left. With an eyedropper or syringe saturate the
waste ink pad with Windex Original or Windex with ammonia D, then dab
at it GENTLY with a paper towel. Repeat as necessary.

Roy




On Nov 4, 2004, at 12:44 PM, Ted Grant wrote:

> OFF TOPIC EPSON 2200 PRINTER PROBLEM.
>
> Howdy folks,
> My 2200 seems to have a problem........ All the ink lights ( 7 ) are 
> flashing along with the "paper out red light."
>
> So 8 flashing lights, new ink wells replaced those in the machine in case 
> it was a freak thing and all 7 inks ran out at the same time. Highly 
> un-likely. There's paper in place, shut off printer, all lights go out.
_______________________________________________
Leica Users Group.
See http://leica-users.org/mailman/listinfo/lug for more information



In reply to: Message from kennybod at mac.com (Kenneth Frazier) ([Leica] More snaps (Skopar))
Message from r.s.taylor at comcast.net (Richard S. Taylor) (Levelling: [was Re: [Leica] More snaps (Skopar)])
Message from s.jessurun95 at chello.nl (animal) (Levelling: [was Re: [Leica] More snaps (Skopar)])
Message from images at InfoAve.Net (Tina Manley) ([Leica] Re: Levelling)
Message from s.jessurun95 at chello.nl (animal) ([Leica] Re: Levelling)
Message from images at InfoAve.Net (Tina Manley) ([Leica] Re: Levelling)
Message from tedgrant at shaw.ca (Ted Grant) ([Leica] OT OT...EPSON 2200 problem?)
Message from rzartarian at snet.net (Roy Zartarian) ([Leica] OT OT...EPSON 2200 problem?)