Archived posting to the Leica Users Group, 2008/04/06

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Repair Help......
From: red735i at earthlink.net (Frank Filippone)
Date: Sun Apr 6 03:14:03 2008
References: <a3f189160804052228t7938d711tcc9c40c6ca763b2d@mail.gmail.com> <C41E5FE2.16F69%lug@steveunsworth.co.uk>

Thanks Steve.,.... 

I do not have a jam, I have a rewind crank that freewheels.....

So if I do the opposite, turn Clockwise, the internal part gets tightened...
which seems like what is needed to repair this problem.

Do I understand correctly?

This means I do not have to touch the external screw on the rewind crank
shaft ????

Frank Filippone
red735i@earthlink.net


-----Original Message-----
From: lug-bounces+red735i=earthlink.net@leica-users.org
[mailto:lug-bounces+red735i=earthlink.net@leica-users.org] On Behalf Of
Steve Unsworth
Sent: Sunday, April 06, 2008 3:09 AM
To: LUG Group
Subject: Re: [Leica] Repair Help......

Kyle's fix was where the rewind crank was jamming - but the disassembly is
obviously the same. If you put a small flat headed screwdriver in the slot
on the inside of the rewind crank and then turn the crank anticlockwise the
crank comes off.

Steve


On 6/4/08 06:28, "Sonny Carter" <sonc.hegr@gmail.com> wrote:

> I'm working from old knowledge, it happened to me about six years ago, but
> the basic disassembly is correct.  I was looking at my MDa.  Just be
gentle
> and you'll figure it out.  The little set screw on the side is the key,
> though.  This is easy, just be gentle.
> 
> In fact, I think Kyle's old page, now gone was derived from my fix.  The
LUG
> IRC was where we discussed it.



_______________________________________________
Leica Users Group.
See http://leica-users.org/mailman/listinfo/lug for more information



Replies: Reply from lug at steveunsworth.co.uk (Steve Unsworth) ([Leica] Repair Help......)
In reply to: Message from sonc.hegr at gmail.com (Sonny Carter) ([Leica] Repair Help......)
Message from lug at steveunsworth.co.uk (Steve Unsworth) ([Leica] Repair Help......)